Untitled Document
 
 
 
 
Untitled Document
 
   
 
 
 
   
 
 
ㆍ
ㆍ
ㆍ
ㆍ
ㆍ

 
CPVC, PP, PVDF등 다양한 재질 적용가능
Sealless Vertical Type.
공회전 가능.
In-Tank Type으로 사용시 자흡가능.
금속 재질의 접액부가 없어 뛰어난 내산/내알칼리성.
  
1.
2.
3.
4.
 
5.
6.
 
7.
Motor fan cover with drip shield.
Standard TEFC Epoxy coated motor.
Air purge plug.
One-Piece Stainless steel rotor shaft assembly Optional 316 SS or Titanimm Shaft available on Most Models.
Viton vapor seal / fume barrier assembly.
Sleeved O-ring Sealed Compound Impeller For Non metallic solution contact.
Overflow
   
 
 
MODEL MAX
FLOW
(gpm)		 MAX
HEAD
(ft)		 MAX
FLOW
50Hz(gpm)		 MAX
HEAD
50Hz(ft)		 HP RPM MOTER
VOLTS		 HERTZ PHASE AMPS DIMENSIONS
HT WITH LTH WT
P-1/15 12 9 10 6 1/15 3000/2450 115 60/50 1 20 10 10 18 9
1/25 3000/2700 208.230 0.9-0.8
P-1/6 22.5 18 19 12 1/6 3200
----
2675		 115 2.0 11 11 19 11
208-230 1.3-1.2
P-1/4 33 18.5 27 13 1/3 3450
----
2850		 110/220 5.4/2.7 26 27
230/460 3 1.2/0.6 26
P-1/2 40 23 33 16 1/2 3450
----
2850		 115/230 60 1 7.8/3.9 45
60/50 6.4/3.2 47
208-230/460 3 1.9-1.8/.09 43
P-1/12HP 66 35 55 24 115/230 60 1 7.8/3.9 45
60/50 6.4/3.2 47
208-230/460 3 1.9-1.8/9 43
P-3/4 64 27.5 53 19 3/4 115/230 60 1 9.8/4.9 47
60/50 10/5 48
208-230/460 3 2.7-2.6/1.3 46
P-3/4HP 70 46 58 31 3/4 115/230 60 1 9.8/4.9 47
60/50 10/5 48
208-230/460 3 2.7-2.6/1.3 46
P-1 74 52 61 36 1 115/230 60 1 11/5.5 50
60/50 12.8/6.4 52
208-230/460 3 3.4-3.2/1.6 47
P-11/2 82 62 68 42 11/2 115/230   1 17.8/8.9 55
208-230/460 3 4.9-4.6/2.3 48
P-2 112 69 93 47 2 208-230/460 5.8-5.4/2.7 60
P-3 135 88 112 60 3 8.2-7.8-/3.9 21 16 36 100
P-5 172 122 142 83 5 12.2-11.6/5.8 120
P-7 1/2 175 166 145 113 71/2 20.5-19.0/9.5 130
   
 
 
P S A HP K T RB

Penguin
Vertical
Pump		 Horespower Construction Material/
O-Ring Elastomer Material		 Impeller/Housing
Configuration		 Shaft
Configuration		 Shaft
Material		 Pump
Bracket Config

1/15=1/15
1/6=1/6
1/4=1/3
1/2=1/2
3/4=3/4
1=1
11/2=11/2
2=2
3=3
5=5
7 1/2 =7 1/2
A=CPVC/EPR
B=Polypropylene /EPR
C=PVDF/VITON		 None=Standard
HP=High pressure		 None=Threaded
K=Keyway		 None=316SS
T=Titanium		 None=Bracket
RB=Round Flange
DP=Bracket Rigid
Plumbed

Not all combinations available
   
 
 
MODEL A B C D E F G H SUCTION DISCHARGE
P-1/15 2 1/2 2 1/2 5 3/4 9 3/8 2 3/8 14 3/8 3 3/4 5/8 3/4 MPT 1/2 FPT
P-1/6 2 1/4 3 1/4 6 1/2 8 7/8 1 1/2 4 1 1 FPT 3/4 FPT
P-1/4 3 1/2 8 9 3/8 19 5/8 5 1 1/8
P-1/2 3 3/4 3 3/4 9 1/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4
P-1/2HP 4 1/2 5 1/2 10 3/8 2 22 5/8 6 1 5/8 1 1/2 FPT 1 MPT
P-3/4 3 3/4 3 3/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4 1 1/4 FPT
P-3/4HP 4 1/2 5 1/2
10 3/8		 2 22 5/8 6 1 5/8 1 1/2 FPT
P-1
P-3 1/2
P-2 23 1/4 2 FPT 1 1/2 MPT
P-3* 6 7 12
12 1/2		 3 28 1/4 12 2 1/8
P-5*
P-7 1/2 5 1/2 5 15 3/10 12 2 5/8 28 3/4 3 1/8